When i replaced all my floodlights with led bulbs, I also replaced my manual dimmers with these.
They work great and can be programmed as to which intensity to turn on at, they also learn how low the ambient light needs to be in order to turn on (Depending on the setting).
Also, there is an advances setting mode, found that in a separate manual. That allows you to lock the switch at a given preset, so even if you change the light level, after turning off and on, you're back to the preset level. This is useful for example in a hallway by the bedrooms were i set the preset at the lowest level so we don't get blasted by light at night.
So, while the positives are obvious from a quick look at the manual, here are a couple gotchas:
- These dimmers work in a three way setup, but only with a companion dimmer that does not have a sensor. So if you want a motion sensor at the base of your stairs and a motion sensor at the top of your stairs, this will not work, kind of a shame. At least with the companion dimmer you can control dimming from both ends of the stairwell and turn the light on/off with the button
- You can use this in a three way setup with a regular siwtch (just have to change a setting so it knows you're using a regular switch)
- the motion sensitivity setting only has high and low - basically, high is not high enough and low is not low enough. Wish it would have a broader adjustment range
My only major issue with these switches is that I have not found out a way to force these to stay on - basically without any movement, the light will go off after the timeout. Yes, you can go in the settings, follow some steps, and disable the motion sensor but that pretty much defeats the purpose of buying a dimmer with a motion sensor. I wish that i could hold the up button and turn the light on and then it would stay on until i press the button. About the same goes for off. If you want the light to stay off while you're in the room, you can pull the bottom service switch, but that's hokey.The way the sensor works is, after you turn off the light, it waits for the movement to stop and then 20 more seconds. but if you're sitting still for 30 seconds, then your next motion will turn on the light. Most other motion activated switches have a manual switch, that would have been an option too.
So, while the ability to force the switch to stay on would have been nice, we really like the switches overall. They work very well and we have them all over our house.
| Operation Mode | ON-OFF |
|---|---|
| Current Rating | 1.25 Amps |
| Operating Voltage | 120 Volts (AC) |
| Contact Type | Electrical |
| Connector Type | Screw |
| Brand | Lutron |
| Terminal | Screw |
| Item dimensions L x W x H | 1.75 x 2.2 x 4.2 inches |
| Circuit Type | 3-way |
| Actuator Type | Rocker |
| Contact Material | Metal |
| International Protection Rating | IP00 |
| Number of Positions | 3 |
| Lower Temperature Rating | 32 Degrees Fahrenheit |
| Upper Temperature Rating | 40 Degrees Celsius |
| Controller Type | Push Button |
| Control Method | Touch |
| Connectivity Protocol | Wi-Fi |
| Color | Brown |
| Wattage | 600 watts |
| Unit Count | 1.0 Count |
| Number of Items | 1 |
| Global Trade Identification Number | 00784276054621 |
| Manufacturer | Lutron Electronics Company, Inc. |
| UPC | 784276054621 |
| Part Number | MSCL-OP153M-BR |
| Item Weight | 4.3 ounces |
| Product Dimensions | 1.75 x 2.2 x 4.2 inches |
| Country of Origin | China |
| Item model number | MSCL-OP153M-BR |
| Is Discontinued By Manufacturer | No |
| Size | 1 Pack |
| Style | Sensor |
| Finish | Brown |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Item Package Quantity | 1 |
| Type of Bulb | Compact Fluorescent,Halogen,Incandescent,LED |
| Special Features | Deep Back Cover |
| Included Components | (1) Maestro sensor switch |
| Batteries Included? | No |
| Batteries Required? | No |
