9/125 micron cable for gigabit Ethernet applications
Cost-effective solution that provides high bandwidth and transmission rates over longer distances. With LC to SC termination; this high quality fiber optic patch cable is specifically designed for gigabit Ethernet applications. The patented injection molding process provides each connection greater durability in resisting pulls; strains and impacts from cabling installs.
Each cable is 100% optically inspected and tested for insertion loss before you receive it. A pull-proof jacket design surrounds the popular 9/125 Single-mode fiber; immune to electrical interference.
Product Features:
- Pull-proof PVC jacket provides immunity to electrical interference
- Single-Mode fiber available in LC; SC and ST connectors
- Available in lengths up to 30m
Specifications:
- Color: Yellow
- Length: 3.00 Meter
- LC Connector Dimensions: 10.75mm Height x 12.5mm Width x 50mm Depth (with installed duplex clip)
- SC Connector Dimensions: 10.6mm Height x 26mm Width x 58mm Depth (with installed duplex clip)
- Maximum Connector Loss: 0.50 dB
- Typical Connector Loss: 0.30 dB
- Typical Return Loss: -55 dB
- Buffer Material: PVC
- Buffer OD: 900 µm
- Jacket Material: PVC (OFNR riser-rated)
- Jacket OD: 1.8 mm
- Installation Tensile Load: 100 N (445 lbs.)
- Long-Term Tensile Load: 50 N (222 lbs.)
- Maximum Tensile Load: 100 N/cm
- Installation (Loaded) Minimum Bend Radius: 5.0cm (1.97in)
- Long-Term (Unloaded) Minimum Bend Radius: 3.0cm (1.2in)
- Crush Resistance: 750 N/cm
- Impact Resistance: 1;000 cycles
- Flex Resistance: 5;000 cycles
- Attenuation at 1550 nm: 0.25 dB/km
- Attenuation at 1310 nm: 0.35 dB/km
- Operating Temperature: -20 degreeC to +70 degreeC
- Weight: 0.080 lbs.
